Bennett Group

Shown in 3511 Bomber Tan (ALL TOP GRAIN ALL OVER)

Bennett Sofa

Bennett Loveseat

Bennett Chair

Bennett Storage Ottoman

Genuine leather will vary slightly in color shade and tone. The photography here may or may not be the exact color as shown. This is not to be considered a defect but a true hallmark of genuine leather quality.
Overall
Height
Overall
Width
Overall
Depth
Seat
Height
Inside
Width
Seat
Depth
Leg
Height
Sofa 36 83 39 20 67 23 3
Loveseat 36 61 39 20 45 23 3
Chair 36 37 39 20 22 23 3
Ottoman 19 31 25 n/a n/a n/a 3

Helpful Links:

Pocket Spring Graphic and Information

 

Contact Scott for more information.

Frame:

The wooden frame on this collection is composed of Beechwood, and European Spruce in all load bearing areas and MDF in all non load bearing areas. These woods are selected at source and seasoned for a minimum of 2 years to ensure long term durability. All of the corners and load bearing areas of our frames are additionally secured with heavy duty corner blocks to add to the strength and durability of the frame. Upon completion of the construction of the frame, we encase the entire structure. This process ensures the strength and integrity of the frame. We the put one inch of foam around the frame before upholstery so that when you touch the sides and backs you notice a firm/soft sensation not four inches of play between the leather and frame as you would find with most of our competitors.


Suspension Unit:

We incorporate in our suspension unit; heavy duty nine gauge sinuous spring steel. These “S” shaped steel springs are fastened to the top of the front rail and run from the front to the back of the piece two inches apart. These springs are attached to the frame using heavy duty clips. Two firm rods are used to hold the springs in place which offers additional durability to the sitting area, both on the front and the back of each individual seat. We also attach a canvas barrier between the foam and the steel springs. This does not allow the foam to wear. We use five steel springs per seat to ensure the strength, comfort and durability of the foam cushion core. In addition: we use two solid wooden stretchers that run front to back to stabilize and strengthen the frame against the tension of the steel sinuous springs. This adds to the strength of the frame itself.


Leather – 3511 Bomber Tan(ALL TOP GRAIN ALL OVER):
The leather on this model is semi aniline. This means that the leather is colored thru and thru and does possess a light coat of polyurethane finish on the surface of the leather. This gives the consumer versatility in wear and use. The most common household stains can be easily cleaned with a damp cloth and mild soap if addressed within minutes of the spill, spot or stain. The grain texture on this leather is DISTRESSED and ANTIQUED. This leather is designed and marketed to resemble an OLD WORLD, DISTRESSED look. You will notice some color variations and grain variations between each piece and sometimes within the same piece. These are natural characteristics and should not be considered unusual.


Cushions & Seating:

We use a POCKET SPRING seat cushion in the seat of the Bennett group. The pocket spring system is created by turning high tensile steel individual springs, which are then wrapped in their own singular pocket of fabric. You will find that each individual seat cushion contains a matrix of individually wrapped coil springs encased in a specifically designed foam shell that is covered in dacron fiber. The system has many benefits. The fabric pocket used allows each spring to slide up and down independently of it’s neighbors allowing for maximum comfort for more than one person on the sofa. The ultra high coil density allows maximum conformity to body contours. The POCKET SPRING system will allow each seat cushion to keep its uniformity over the life of the furniture. You will find the seat cushions to be loose (except for recliner) which adds to the versatility of the frame.


Sales Features and Benefits of the Bennett Group:

This model is a classic, urban, retro design all wrapped up in one beautiful collection. The arm gives you a look of an old rustic retro era. The comfort and pitch as always is truly “American” We accented the back cushions with a unique stitch pattern. This lightly contrasting stitch also will add a nice clean detail to the product. You will notice the almost black brushed studs that accent the arms and back side panels. These details will add years of class and character to this collection. The arm roll is considered to be petite and classy. You will also love the beautiful shaping of the front rail. This accent adds so much look and feel to the Bennett Group. This model is a classic, urban, retro design all wrapped up in one beautiful collection. The arm gives you a look of an old rustic retro era. The comfort and pitch as always is truly “American”.  The solid wooden foot also gives you an old world feel. If you are looking for an occasional bedroom chair or a reading chair the Andrew chair would definitely work for you. We sell a lot of these chairs as occasional chairs as well. You will find that there are no seams in the seat or back cushions. The cushions on both seat and back are fully welted. You will also find this collection to give you the “relaxed” comfort that DOWN BLEND seat cushions will give you.