Eric Group

Shown In Stock Color : 302 Sky

The leather shown above on the Eric is 302 Sky. This leather is not available. Please chose from the special orders options below.

SPECIAL ORDER OPTIONS: (DELIVERY IN 90-120 DAYS)

2552 WHEAT

153 SIENNA

2511 Havana

150 WHISKEY

2525 CHERRY

155 Antique Tan

315 OLD WEST

156 Safari

310 BLACK

232 TAUPE

309 IVORY

308 PEWTER

SPECIAL ORDER OPTIONS: (DELIVERY IN 90-120 DAYS)

Genuine leather will vary slightly in color shade and tone. The photography here may or may not be the exact color as shown. This is not to be considered a defect but a true hallmark of genuine leather quality

FEATURES:

Helpful Links:

– Eric Product Specifications
– Pocket Spring Graphic and Information

 

Contact Scott for Authorized Luke Leather Dealers in Your Area

 

Frame:
The wooden frame on this collection is composed of beech wood and ash. These woods are selected at source and seasoned for a minimum of 2 tears to ensure long term durability. All of the corners and load bearing areas of our frames are additionally secured with heavy duty corner blocks to add to the strength and durability of the frame. Upon completion of the construction of the frame, we encase the entire structure. This process ensures the strength and integrity of the frame. We the put one inch of foam around the frame before upholstery so that when you touch the sides and backs you notice a firm/soft sensation not four inches of play between the leather and frame as you would find with most of our competitors.


Suspension Unit:

We incorporate in our suspension unit; heavy duty nine gauge sinuous spring steel. These “S” shaped steel springs are fastened to the top of the front rail and run from the front to the back of the piece two inches apart. These springs are attached to the frame using heavy duty clips. Two firm rods are used to hold the springs in place which offers additional durability to the sitting area, both on the front and back of each individual seat. We also attach a canvas barrier between the foam and the steel springs. This does not allow the foam to wear. We use five steel springs per seat to ensure the strength, comfort and durability of the foam cushion core. In addition: we use two solid wooden stretchers that runs front to back to stabilize and strengthen the frame against the tension of the steel sinuous springs. This adds to the strength of the frame itself.


Leather – 302 Sky:

The leather on this model is semi aniline. This means that the leather is colored thru and thru and does possess a light coat of polyurethane finish on the surface of the leather. This gives the consumer versatility in wear and use. The most common household stains can be easily cleaned with a damp cloth and mild soap if addressed within minutes of the spill, spot or stain. There is no question that the unique leather color will make your room the most talked about room in the house. The leather is buttery soft and the natural grain texture will no doubt show the true Italian heritage of this exquisite leather. Genuine Italian leather may vary slightly in color, shade and tone. This is a hallmark of genuine italian leather.


Cushions & Seating:

The seat cushions are composed of polyurethane foam cores with a high quality Dacron topper on the surface for comfort. The density of these cushions will vary from 2.0 to 2.3. This is a unit of measurement of the number of porous holes in the cushion. The standard quality in our industry would be 1.8. We also incorporate POCKET SPRINGS inside each seat cushion. This will give you long term, seat cushion performance. The back cushions are composed of dacron fiber which is blown in to vertically and horizontally channeled bags. This ensures that the proper amount of dacron is blown in the same every time.


Sales Features and Benefits of the Eric Group:

The seat cushions are composed of polyurethane foam cores with a high quality Dacron topper on the surface for comfort. The density of these cushions will vary from 2.0 to 2.3. This is a unit of measurement of the number of porous holes in the cushion. The standard quality in our industry would be 1.8. We also incorporate POCKET SPRINGS inside each seat cushion. This will give you long term, seat cushion performance. The back cushions are composed of dacron fiber which is blown in to vertically and horizontally channeled bags. This ensures that the proper amount of dacron is blown in the same every time.