Nora Group

Shown in 3517 Cinnamon

Nora Sofa

Nora Loveseat

Nora Chair

Nora Ottoman

Genuine leather will vary slightly in color shade and tone. The photography here may or may not be the exact color as shown. This is not to be considered a defect but a true hallmark of genuine leather quality.
Overall
Height
Overall
Width
Overall
Depth
Seat
Height
Inside
Width
Seat
Depth
Leg
Height
Sofa 35 93 39 20 73 22 7
Loveseat 35 72 39 20 48 22 7
Chair 35 45 39 20 23 22 7
Otto 20 31 25 n/a n/a n/a 7

Helpful Links:
Pocket Spring Graphic and Information

 

Contact Scott for more information.

Frame:

The wooden frame on this collection is composed of beech wood and ash. These woods are selected at source and seasoned for a minimum of 2 years to ensure long term durability. All of the corners and load bearing areas of our frames are additionally secured with heavy duty corner blocks to add to the strength and durability. Upon completion of the construction of the frame, we encase the entire structure. This process ensures the strength and integrity of the frame. We the put one inch of foam around the frame before upholstery so that when you touch the sides and backs you notice a firm/soft sensation not four inches of play between the leather and frame as you would find with most of our competitors.


Suspension Unit:
We incorporate in our suspension unit; heavy duty 9 gauge, sinuous spring steel. These “S: shaped steel springs are fastened to the top of the front rail and run from the front to the back of the piece two inches apart. These springs are attached to the frame using heavy duty clips. Two firm rods are used to hold the springs in place which offers additional durability to the sitting area, both on the front and the back of each individual seat. We also attach a canvas barrier between the foam and the steel springs. This does not allow the foam to wear. We use five steel springs per seat to ensure the strength, comfort and durability of the foam cushion core. In addition: we use two solid wooden stretchers that run front to back to stabilize and strengthen the frame against the tension of the steel sinuous springs. This adds to the strength of the frame itself.


Leather – 3517 Cinnamon (ALL TOP GRAIN ALL OVER):
The leather on this collection is SEMI ANILINE DYED. This means that the leather is colored thru and thru and does possess a light protective coat of polyurethane on the surface of the leather. YOU WILL NOTICE ALL DISTINCT VARIATIONS IN THIS LEATHER INCLUDING COLOR VARIATION AND ALL OF THE NATURAL MARKINGS. You will notice some color variation and grain variations between each piece and sometimes within the same piece. These are natural characteristics and should not be considered defects. The leather is buttery soft and will work in any décor or color scheme at home. You will also notice this leather to have a vintage OLD WORLD, ANTIQUED effect. THIS LEATHER IS ONE OF THE MOST LUXURIOUS LEATHER’S IN OUR ENTIRE COLLECTION


Cushions & Seating:
The seat cushions are LOOSE and are composed of polyurethane foam cores with a high quality, DACRON topper for comfort. You will find the density of the seat cushions will vary from 2.0 to 2.3. This is a unit of measurement of the number of porous holes in the cushion. The standard quality in our industry would be 1.8. The back cushions are FIXED and are composed of Dacron fiber which is blown by computer into vertically and horizontally channeled bags. This ensures that the proper amount of Dacron is blown in the same every time. The POCKET COIL seating is also present here, as this enhanced seating comes standard in all Luke Leather products and adds years of durability to the seating.


Sales Features and Benefits of the NORA COLLECTION:
The Nora Collection is Classic Retro. You can simply look at the frame and see that the styling, lines and design is world class. The SQUARE features as well as the large retro square arm are so handsome and will captivate in any lifestyle environment.